Secure Shopping

secure shopping

Belbien W-780 Light Burl Wood Grain Wrap Vinyl

Belbien W-780 Light Burl Wood Grain Vinyl Wrap
Click to enlarge

More images

  • Belbien W-780 Light Burl Wood Grain Wrap Vinyl
Click to enlarge
Price: $34.99
Manufacturer: Belbien
Weight: 0.85 lbs

Quantity Discount

  • Buy 2 - 5 and get an additional 10 % off
  • Buy 6 - 10 and get an additional 15 % off
  • Buy 11 - 20 and get an additional 20 % off
  • Buy 21 - 30 and get an additional 25 % off
  • Buy 31 - 40 and get an additional 30 % off
  • Buy 41 - 1,000 and get an additional 35 % off

Purchase 2 of Belbien W-780 Light Burl Wood Grain Wrap Vinyl and get:

A $3.99 VALUE!


Min/Max Order: 1 / 1000


Belbien W-780 Light Burl Wood Grain Wrap Vinyl is cut from a 48" wide roll and is sold by the foot. Price starts at $34.99 for the 1st linear foot. For example, to purchase a 48" wide x 72" long sheet, you would enter "6" in the quantity textbox above. Each quantity purchased is equals to 1 linear foot, or 12 inches long. You'll receive one continuous sheet when you purchase more than 1 linear foot. Purchase 2 linear foot or more and get additional discount.

Belbien light burl wood grain is a self-adhesive vinyl film with a pressure sensitive adhesive and release paper. It is commonly applied to wall panel systems, casework, store fixtures, columns, doors, elevators, healthcare workstations, etc.

Both the printing and emboss processes are manufactured using state-of-art technology that depict real natural aesthetics including real wood veneers, marble, granite, ceramics, leather, metals, etc. Belbien is CLASS A Fire rated by UL-723 and ASTM E-84 testing.

Belbien dark burl wood grain is self-adhering and can be applied to virtually any flat or curved surface, including walls, ceilings, floors, furniture, elevator cabs, automobiles, just to name a few. Sample is available for purchase, Click Here.

Notes: Install in a clean area, away from dust and wind. Application surface should be cleaned with soap and water or other cleaning agents. Cleaning agents must NOT contain ammonia (like Windex) as these will dissolve the adhesive. On complex curves and edges, apply heat for better adhesion and conformity to curved surface. 3M Primer 94 is recommended for application involving sharp edges or extreme curves. For a more glossy look, apply a high quality clear coating.


• Self-adhesive back
• Air Egress Technology. Dry Application. NO Water needed!
• Lay-flat, bubble free installation
• Can be re-lifted, repositioned and stretched
• Textured pattern! Semi-gloss
• Stretchable with heat
• Conform to contours and bend easily
• High temperature & water resistant
• Install Temp: 60F to 80F (16C to 26C)
• End Use Temp: 5F to 201F (-20C to 91C)
• Can be cleaned with soap and water
• Stands up against water, dirt, grease, salt, mild acids and oil.
• Durability: 1 year outdoor/unlimited indoor. Recommended for indoor use.
• Thickness: 8 mil (.008" thick film)
Note: The videos below are for instructional purpose only.

Comment on Facebook

Products You May Like