3D Gloss Anthracite Carbon Fiber Fabric Wrap Vinyl

3D twill weave gloss ANTHRACITE (charcoal, dark grey) carbon fiber fabric wrap vinyl comes in a 50" wide roll and is sold by the foot. Price starts at $19.99 for the 1st linear foot. For example, to purchase a 50" wide x 72" long sheet, you would enter "6" in the quantity textbox above. Each quantity purchased is equals to 1 linear foot, or 12 inches long. You'll receive one continuous sheet when you purchase more than 1 linear foot. Purchase 2 linear foot or more and get additional discount.

3D Carbon Fiber Fabric comes with strong adhesive backing. There is no need to apply glue to the back of the carbon fiber fabric. 3D carbon fiber fabric can be re-lifted, repositioned, and stretched. It is very flexible and easy to work with. Easily conform to cuves an edges. Apply dry, no need for use of water and soap solution. No heat needed. If working around complex curves and edges, you can apply low heat to help with adhesion.

3D carbon fiber fabric is for interior use. Outdoor use is not recommended. It is very easy to work with. Use 3D carbon fiber fabric on the interior your your vehicles like interior trims and panels, on boombox, cell phones, laptops, video consoles, table top, etc... Any smooth, hard, non-porous surface can be accented with 3D carbon fiber fabric. Sample is available for purchase, Click Here.

Notes: Install in a clean area, away from dust and wind. Application surface should be cleaned with soap and water or other cleaning agents. Cleaning agents must NOT contain ammonia (like Windex) as these will dissolve the adhesive. On complex curves and edges, apply heat for better adhesion and conformity to curved surface. 3M Primer 94 is recommended for application involving sharp edges or extreme curves. For a more glossy look, apply a high quality clear coating.