|
2D
High Gloss Black Carbon Fiber Wrap Vinyl comes in a 50" wide roll
and is sold by the foot. Price starts at $17.99
for the 1st linear foot. For example, to purchase
a 50" wide x 72" long sheet, you would enter "6"
in the quantity textbox above. Each quantity purchased is equals to
1 linear foot, or 12 inches long. You'll receive
one continuous sheet when you purchase more than 1 linear foot. Purchase
2 linear foot or more and get additional discount.
2D
High Gloss Black Carbon Fiber Wrap Vinyl can be applied
to virtually band flat or curved surface, including walls, ceilings, floors,
furniture, elevator cabs, automobiles, just to name a few. Sample
is available for purchase, Click
Here.
Notes:
Install in a clean area, away from dust and wind. Application surface
should be cleaned with soap and water or other cleaning agents. Cleaning
agents must NOT contain ammonia (like Windex) as these will dissolve
the adhesive. On complex curves and edges, apply "low" heat
for better adhesion and conformity to curved surface. 3M
Primer 94 is recommended for application involving sharp
edges or extreme curves.
|
•
Permanent acrylic pressure-sensitive adhesive
• Can be re-lifted, repositioned and stretched
• Realistic 2D High Gloss Black Carbon Fiber
• Stretchable with heat
• Conform to contours and bend easily
• High temperature & water resistant
• Install Temp: 60F to 80F (16C to 26C)
• End Use Temp: -4F to 206F (-15C to 97C)
• Can be cleaned with soap and water
• Stands up against water, dirt, grease, salt, mild acids and oil.
• Long life with excellent UV durability: 3-5 yrs outdoor/unlimited
indoor
• Design for auto wrapping, 5 mil (.005" thick film) |
; "2D High Gloss Black Carbon Fiber Wrap Vinyl")
;)
