Categories

Newsletter

Secure Shopping

secure shopping

3D Gloss Silver Carbon Fiber Fabric Wrap Vinyl

3D Gloss Silver Carbon Fiber Fabric Vinyl Wrap
Click to enlarge
Price: $19.99
Weight: 0.85 lbs

Quantity Discount

  • Buy 2 - 5 and get an additional 10 % off
  • Buy 6 - 10 and get an additional 15 % off
  • Buy 11 - 20 and get an additional 20 % off
  • Buy 21 - 30 and get an additional 25 % off
  • Buy 31 - 40 and get an additional 30 % off
  • Buy 41 - 1,000 and get an additional 35 % off

Purchase 2 of 3D Gloss Silver Carbon Fiber Fabric Wrap Vinyl and get:

A $3.99 VALUE!

Purchase

Min/Max Order: 1 / 1000

Description

3D twill weave gloss SILVER carbon fiber fabric wrap vinyl comes in a 50" wide roll and is sold by the foot. Price starts at $19.99 for the 1st linear foot. For example, to purchase a 50" wide x 72" long sheet, you would enter "6" in the quantity textbox above. Each quantity purchased is equals to 1 linear foot, or 12 inches long. You'll receive one continuous sheet when you purchase more than 1 linear foot. Purchase 2 linear foot or more and get additional discount.

3D Carbon Fiber Fabric comes with strong adhesive backing. There is no need to apply glue to the back of the carbon fiber fabric. 3D carbon fiber fabric can be re-lifted, repositioned, and stretched. It is very flexible and easy to work with. Easily conform to cuves an edges. Apply dry, no need for use of water and soap solution. No heat needed. If working around complex curves and edges, you can apply low heat to help with adhesion.

3D carbon fiber fabric is for interior use. Outdoor use is not recommended. It is very easy to work with. Use 3D carbon fiber fabric on the interior your your vehicles like interior trims and panels, on boombox, cell phones, laptops, video consoles, table top, etc... Any smooth, hard, non-porous surface can be accented with 3D carbon fiber fabric. Sample is available for purchase, Click Here.

Notes: Install in a clean area, away from dust and wind. Application surface should be cleaned with soap and water or other cleaning agents. Cleaning agents must NOT contain ammonia (like Windex) as these will dissolve the adhesive. On complex curves and edges, apply heat for better adhesion and conformity to curved surface. 3M Primer 94 is recommended for application involving sharp edges or extreme curves. For a more glossy look, apply a high quality clear coating.

 
Note: The pictures shown below are gloss black carbon fiber fabric. They are for illustration purposes to show the properties and usage of the fabric carbon fiber material.
 
CLick to Enlarge: Gloss Black Carbon Fiber  Fabric
CLick to Enlarge: Gloss Black Carbon Fiber  Fabric
CLick to Enlarge: Gloss Black Carbon Fiber  Fabric
CLick to Enlarge: Gloss Black Carbon Fiber  Fabric
CLick to Enlarge: Gloss Black Carbon Fiber  Fabric
CLick to Enlarge: Gloss Black Carbon Fiber  Fabric
 
Features:
• 3D Fabric Gloss Carbon Fiber With Adhesive Backing
• Lay-flat, bubble free installation
• Apply Dry. No messy water soap solution needed!
• Can be re-lifted, repositioned and stretched. NO HEAT NEEDED!
• Textured pattern, WITH WEAVES! NOT PRINTED!
• Conform to contours and bend easily
• Install Temp: 60F to 80F (16C to 26C)
• Can be cleaned with soap and water
• For Interior Use. Outdoor not recommended.
• Durability:unlimited indoor
• 10mil (.010" thick film)
   
Note: The videos below are for instructional purpose only. 3D Fabric carbon fiber is applied in the same way, but easier!
   

Comment on Facebook

Products You May Like